I Rebuilt Mister Dos' Suspension // DIY MR2 Strut Rebuild

Sarah -n- Tuned

Sarah -n- Tuned

135 365 Aufrufe97

    Bye bye blown shocks! Rebuilding the struts on project Mister Dos. 1991 MR2 Turbo. Big Thanks to my Subscriber who donated his leftover MR2 parts!
    KYB Shock Inserts Toyota MR2
    amzn.to/2QGs3n7 Rear
    amzn.to/2qMXVv9 Front
    Follow Me:
    Instagram: sarahntuned
    Snapchat: sarahntuned
    Twitter: sarahntuned
    www.patreon.com/sarahntuned
    www.amazon.com/shop/sarah-n-tuned
    Fan Mail:
    Sarah-n-Tuned
    P.O. Box 1250
    Vail, AZ, 85641-9803
    Special Thanks to my Patreon Support!
    Brandyn E.
    Chad B.
    Charles W.
    David T.
    Josh H.
    Kevin C.
    Kevin.
    Mark L.
    Matthew
    Nenad R.
    Noco
    Robby L.
    Tisha H.
    Travis Y.
    Todd A
    #MR2 #Sarahntuned #SW20

    Am Vor year

    KOMMENTARE

    1. Mr West

      2020 rewatch. I'm waiting on the 5:15.

    2. Mike Harris

      You’re a trooper

    3. Mike Harris

      You make me laugh, thank you

    4. Shaun Lesky

      Keep doing what your doing you always look good and i do think your funny alot of the time

    5. Bleeds Ford Blue

      Peter Griffin approves this video

    6. Mike Walsh

      Perfect mix of smart/sexy/funny and fearlessness!! Something like a unicorn 🦄💯💯

    7. S Ubes

      You pulled the shaft and it jizzed on your leg!

    8. Steve Akendo

      I love you😘😘

    9. New Image Remodeling and Paint

      A car jack under the control arm with some pressure you can remove the retaining nut while it's still on the car. I find it safer than any other way. to remove the springs.

    10. New Image Remodeling and Paint

      Have you been told that you are adorable? You are funny. On wet sanding, if you have a DA, that a air Sander you can wet sand the car. Also using dishwashing liquid make so much easier.

    11. ryan whitaker

      Sarah I love watching your video because I learn a lot from watching your videos.

    12. The_Name _Murph

      1:41 seconds in and I can already confirm youre the type of channel that shows off your chest and makes sexual jokes. Buy a turtle neck and I might think about watch your videos.

    13. Hypothalamus JelloLap

      Just use a press drill to increase the diameter of the bore on the threaded shock nut.

    14. Jeremy Murphy

      That's cool you can stay friends with your ex. So many people can't.

    15. Jeffrey Wu

      oh my god she is hot, but titties like my ex girlfriend thanks for the video

    16. Powder Blue

      3:58 - Best line of the video, trust me ;) The smirk at the end is priceless.

    17. Alan Land

      Good luck with the sponsor solicitation. With 140K subs, they should be lining up to support your builds.

    18. Iain Mcglynn

      Loved this one ☝️ You really do put in a huge effort but it’s all appreciated and worth it What did I do before, must have wasted a lot of time x

    19. DrDennis77

      Beautiful Dos’as

    20. Markus Langguth

      :D :D :D You are so crazy! (in a positive way :) )

    21. James Bockenstette

      Oooo. I got it on me?

    22. James Bockenstette

      Bust a nut? Proper Sarah being verbally inappropriate? No!

    23. James Bockenstette

      Inappropriate? Not proper Sarah.

    24. Al Stasko

      If you use 3m Trizact on your Da sander you will save so much time they come in all grits . I use with Da sander with soap water they are expensive but you can buy on eBay for a lot less please try I use when I am done a wooly pad on my polisher with 3M polish compound it will look like glass when done I love your Videos keep up the great work!

    25. picknngrinnin

      “I’m a girl. These are my boobs!”

    26. vinniedayhiker B

      Sarah you are awesome!

    27. crxdelsolsir

      Gone are the days where things are constructed for you to dismantle and just change the actual broken part. Now days, manufacturers seal the components and make them permanently attached to other parts so you MUST replace and replace as a Unit. That way you end up buying more than what you really need and they get more profits. Forget the environment and forget your savings.

    28. davie crocket

      But again, you are soooo funny! Sarah! make sure you always wear gloves when touching the strut, incase it leaks lol

    29. Tammy Martin

      I have a 91 Mr2 and I really like /need the information. Congratulations we've been taking making money from men's smaller brain forever 🙂. You know the old joke, why men think women have no brains? We don't have a... to keep them in. I just can't sort through all the silliness. I look forward to the day when you can get sponsorship without having to lower yourself to this level. Im, sure it's aggravating & I wish I knew all the answers. ✌out.

    30. crxdelsolsir

      2:00 "These bushings look brand new and this thing is nearly 30 years old" = back when manufacturers were more honest and not shortchanging us with obsolescence. Soon thoughts of things lasting so many years will be replaced from living memory. Replaced with new memories and expectations of things being OK to be replaced after 4 to 5 years with manufacturers conditioning consumers 4 to 5 years is very long.

    31. MechMike

      So proud of you. Marry me

    32. oldskuul

      Love those MR2s.. check out my crx video. cheers Rob

    33. アントニオ猪木

      That was way better foreign us to cherish the Japanese cars is proud as a very Japanese.

    34. Jose Gramajo

      Sarah you are so cute and beautiful. You shouldn’t be doing what you are doing. You should have a boyfriend who will help you with it.

    35. ebarton1475

      I'll help you bust a nut anytime

    36. Brian Corrigan

      Great work as always. Your persistence is genuinely inspiring. Two little points of advice: 1) add a little oil to the housing, drop the cartridge in, and top off. It helps with heat transfer and makes it easy to take apart the next time. 2) Also, you might mention that you didn't use spring compressors because those springs are shorter than stock, so not preloaded at full extension. In most cases, removing the top nut with the strut out of the car with stock springs results in a nut and wrench shaped projectile. Not funny. Ok, it was a little funny the one time I did it on purpose, but it shot my impact gun straight up into a fireproofed plaster/lathe ceiling. Dented ceiling. Activate brown pants. If you don't have spring compressors, undo the top nut with weight still on tires, then jack up to unload springs - might be a tight squeeze getting them out, in which case, spring compressor.

    37. Wayne Nero

      So much funny! What a great host!

    38. Porsche9872

      I know she is not the one who really did the work but I am still watching it

    39. Fmiguelife

      4:01 to bist the nut hehehe

    40. ScrewsNutsAndBolts

      Awesome channel 👍🏻

    41. Omar Cuevas

      your realy good editing i like your vids there awsome

    42. Junior Souza

      Perfeita!!!

    43. Slichman500

      Sarah you look very nice in this video to be working on Mr. Dos lol and those innuendos too 😂😏

    44. MAGA OFFENSIVE

      My gosh. !😍

    45. Near sighted from the Far side

      Boobs are looking awesome in this vid 👍🏻

    46. Malaz

      1st video for me... since u said my ex, so u r free now.... I'm single too

      1. Todd 76

        And staying that way

    47. 15 DurangoRT

      😝😝😝

    48. ramblingrebel68

      So much easier to just replace the entire assembly

    49. ramblingrebel68

      Why disassemble the stut

    50. alberto Vasquez

      Great video keep up the good work

    51. Craig Martin

      Did she say busted the nut off?!

    52. atticstattic

      Fun and educational.....how much do I owe you?

    53. Alex Gunn

      Just found this channel yesterday and it's excellent and funny. That MR2 looks like a lot of fun.

    54. Spinnetti

      So, on the brake lines, just use tin snips and cut through the tab on the strut and bend at the cut.. Viola. Strut out without taking apart the brake line. When reassembling, just bend back. The metal is quite thick there so it loses nothing and works just like new. Done that for decades on my Toyotas. Also, put a little oil in the tubes when you put the inserts in. The oil will transfer the heat from the insert to the outside tube making them work more consistently and last longer. Haven't checked in for a while. Have you been upping the sexy game on the clothes, makeup and double entendres? Gets more views I'm sure, but doesn't look that practical for wrenching lol. Did my first Daddy/Daughter junkyard run yesterday - I should have her watch your vids. Well, off to the garage to work on my Lexus race car.

    55. bag man

      Inappropriate stroking.... hahahaha.

    56. Robert George

      LOL... well done Sarah

      1. Robert George

        ...by that I mean I got my power tool fix on for the day, thank you. I miss my 1964 Plymouth Valiant station wagon...

    57. Amorphous Shapes

      Tits.

    58. Jim Bond

      Thank God those springs aren't loaded. Having done many strut and shock replacements, I cringed when you took the top nut off. I know. It's was a knee-jerk response. I do enjoy your sense of humor.

    59. R J

      Wow ! Love her!

    60. brucenoneyabusness

      I must say, the dry humor is pretty entertaining

    61. Tatts Bk

      You can use my lathe anytime lol

    62. Hello

      I could make love to you for days straight just saying gosh is that so bad?

    63. Jason Brooks

      I could only dream of meeting a woman like this!!! And she says, dream on!!

    64. Richard Fritz

      I want your tits

    65. Star Per

      👍

    66. Bill Kamp

      FWIW -- I'm pretty sure that the term "Ewww!!!" is not in the mechanics approved lexicon...;-) I guess we can make an exception in this case tho...

    67. Dodge Guy

      This is my first time... watching one of your videos. You are a hoot! Love the video!

    68. Auto Body Everything

      Is painting what you enjoy doing most?

      1. Auto Body Everything

        Sarah -n- Tuned... well that’s a genuine answer 🤘

      2. Sarah -n- Tuned

        No, making people smile is. And yes, I know how corny that sounds.

    69. Vio Violine

      Benutz lieber Federspanner.

    70. Craig Boyd

      Fair play to you following your dreams and just getting it done !